SUPER K ® ULTRA
Self-adhesive asphalt membrane modified with SBS (styrene-butadiene-styrene) elastomeric polymers, reinforced with internal reinforcement of polyester felt with reinforcement yarns and thermo-fusible polyethylene on the upper side and siliconized polyethylene on the lower side.
Uses/Applications
- Waterproofing of foundations, floors, subfloors, between floors, baseboards, walls and buried elements.
PRODUCT DETAILS
Features
- Waterproof.
- Resistant to degradation by solar radiation, atmospheric agents, industrial pollution...
- High resistance to tensile and punching stresses
- Easy application: Self-adhesive
IMPTEK ACADEMY
Installation method
1. Clean the surface (it must be dry).
2. Prime the surface with IMPTEK ASPHALTIC CEMENT or ULTRAPRIMER (porous surfaces).
3. Install fully adhered on the surface.
- Spread the membrane over the surface, then fold in half lengthwise and remove the non-stick polyethylene from one side to be used.
- Repeat the process on the other side of the membrane.
- Apply weight on the membrane for 8 times using a metal roller of at least 25kg.
- Install the membranes with longitudinal overlaps of 10 cm (± 1 cm) and transverse overlaps of 15 cm (± 1 cm). Before placing the membrane on the overlaps, the siliconized polyethylene must be removed.
Specifications
Presentations
- Roll
Dimensions:
Roll of 10 m x 1 m
Thickness:
2.5 mm / 3 mm Tolerance ± 7%.
Roll Weight (Nominal):
30 kg / 40 kg Tolerance ± 6%.
Yield (Approx):
(9 m²)
Applications:
- Foundations
- Roofs with various protections
- Terraces and curbs
- Base in two-layer system
Technical Data
Applications
Storage
Under cover in a cool, dry place, protected from sunlight. Vertically and do not place weight on top of it.
Do not store at temperatures below 5 °C and not above 40 °C.
This product is part of a complete waterproofing system.
Related Products
