IMPERPOL ® ULTRA
Self-adhesive asphalt membrane modified with SBS (styrene-butadiene-styrene) elastomeric polymers, reinforced with internal reinforcement of polyester felt with reinforcing threads and self-protection of mineral granules on the upper face and siliconized polyethylene on the lower face.
Uses/Applications
PRODUCT DETAILS
Features
- Waterproof.
- Resistant to degradation by solar radiation, atmospheric agents, industrial pollution...
- High resistance to tensile and punching stresses
- Easy application: Self-adhesive
- Excellent elastic recovery: due to its composition of SBS elastomeric polymers.
IMPTEK ACADEMY
Installation method
1. Clean the surface (it must be dry).
2. Prime the surface with IMPTEK ASPHALTIC CEMENT or ULTRAPRIMER (porous surfaces).
3. Install fully adhered to the surface.
Spread the membrane on the surface, then fold in half lengthwise and remove the non-stick polyethylene from one of the sides to be used.
Repeat the process on the other side of the membrane.
Apply weight on the membrane for 8 times using a metal roller of at least 25 kg.
Install the membranes with longitudinal overlaps of 10 cm (± 1 cm) and transverse overlaps of 15 cm (± 1 cm). Before placing the membrane on the overlaps, the siliconized polyethylene must be removed.
Specifications
Presentations
- Roll
Dimensions
- Roll of 10 m x 1 m
Thickness:
3.5 mm / 4 mm Tolerance ± 7%.
Roll Weight (Nominal):
45 kg / 50 kg Tolerance ± 6%.
Yield (Approx):
(9 m²)
Nominal thickness:
2 ± 10% mm
Applications:
Preventive and corrective roofing
- Residential
- Commercial
- Industrial
- Institutional
Imperpol Ultra Technical Data Sheet
Applications
Storage
This product is part of a complete waterproofing system.
Related Products




