Imperglass® Imperglass® Imperglass® Imperglass® Imperglass® Imperglass® Imperglass® Imperglass® Imperglass
SBS polymer-modified asphalt membranes, fiberglass reinforcement,
coated on the lower face with thermo fusible polyethylene and self-protected with mineral granules on the upper face.
mineral granules on the upper side.
Designed for the waterproofing of concrete pitched roofs in single-layer system or as a finishing
in single-layer systems or as a finishing membrane in multi-layer systems.
Uses/Applications
- Waterproofing of non-trafficable concrete roofs.- Waterproofing of non-trafficable roofs: flat, sloped, vaults, terraces, etc.; as long as it is as a finishing membrane in multi-layer systems (accompanied by membranes with polyester reinforcement at the base).
PRODUCT DETAILS
Features
- Waterproof.
- Maintains dimensional stability.
- Adhesive thermos.
- Granular finish (Colors: black, green, tobacco, red).
- No UV protection required.
IMPTEK ACADEMY
Installation method
- Clean the surface (it must be dry).
- Prime the surface with IMPTEK ASPHALTIC CEMENT or ULTRAPRIMER (on concrete it is a single coat system).
- Apply to the base surface or membrane completely adhered by hot melt using a gas torch.
The flame should be applied tangentially to the hot melt polyethylene to expose the modified bitumen and allow it to adhere to the previously primed surface.
- Seal the overlaps using POLIBREA.
Specifications /Presentations
Presentations
- Dimensions: 10 m x 1 m.
- Nominal weight: 4 kg/m² / 5kg/m².
- Nominal thickness: 3 mm / 4 mm.
- 9 m² / roll including overlapping.
Technical Data
Applications
Storage
Store indoors in a cool, dry place.
Protected from the action of the sun's rays.
Recommended temperatures: not below -10°C and not above 40°C.
Laminar products should be stored vertically.
This product is part of a complete waterproofing system.
Related Products
