Imperpol® Imperpol
Asphalt membranes modified with SBS polymers, polyester reinforcement and coated on the lower face
with thermo fusible polyethylene and self-protection of mineral granules on the upper face.
Designed for waterproofing all types of roofs and applicable on a wide variety of substrates.
Uses/Applications
- Waterproofing of all types of non-trafficable roofs, flat, sloping, vaults, terraces, etc.- As a finishing membrane in two-layer or multilayer systems.
PRODUCT DETAILS
Features
- Waterproof.
- Excellent resistance to tensile stress.
- Flexible, it adapts to different types of surfaces.
- Adhesive thermos.
- Granular finish (Colors: black, green, tobacco, red and gray).
- No UV protection required.
IMPTEK ACADEMY
Installation method
1. Clean the surface (must be dry).
Prime the surface with IMPTEK ASPHALTIC CEMENT or ULTRAPRIMER (porous surfaces if it is a single coat system).
3. Apply to the fully adhered surface or base membrane by hot melt application using a gas torch.
Note: The flame must be applied tangentially to the hot melt polyethylene to expose the modified bitumen and allow it to adhere to the previously primed surface.
4. Seal the overlaps using POLIBREA.
Specifications
Presentations
- Dimensions: 10 m x 1 m.
- Nominal weight: 4 kg/m² / 5kg/m².
- Nominal thickness: 3 mm / 4 mm.
- Yield 9 m² / roll including overlapping.
Technical Data
Applications
Storage
Store indoors in a cool, dry place.
Protected from the action of the sun's rays.
Recommended temperatures: not below 5°C and not above 40°C.
Laminar products should be stored vertically.
This product is part of a complete waterproofing system.
Related Products
