Polibrea
Asphaltic mastic with SBS-type elastomeric polymers, mineral fillers and hot-applied additives for crack sealing.
Crack sealant and joint filler in wearing courses, for both rigid (concrete) and flexible (asphalt) pavements.for rigid pavements (concrete) as well as for flexible pavements (asphalt).
PRODUCT DETAILS
Features
- Waterproof
- Resistant to degradation and atmospheric agents.
- Highly flexible, it adapts to any shape of surface, resistant to traction in constructive joint movements.
- Excellent elastic recovery due to its composition of SBS elastomeric polymers.
IMPTEK ACADEMY
Installation method
Crack opening: this procedure should be done with a grinder, drill or cutting disc, and is necessary when the crack is less than 3 mm thick, otherwise this step can be avoided.
Crack cleaning: all types of impurities, dust and humidity must be removed from the crack, this procedure is done with the sealing equipment that incorporates a compressor and a hose that releases pressurized air.
Heating of the product, the rolls of Polibrea L-10 should be placed in the sealing equipment, so that the product melts, and bring it to a temperature between 180°C to 200°C.
Application: the melted polybrea should be placed by means of the application hose on the crack, making sure that the product penetrates the crack, then let it cool down to a temperature of 60 °C in order to allow the traffic to pass.
Specifications
Applications
Storage
Store indoors in a cool, dry place.
Protected from the action of the sun's rays.
Recommended temperatures: not below 5°C and not above 40°C.
Laminar products should be stored vertically.
Do not store materials containing solvents on Imptek Parking.
This product is part of a complete waterproofing system.
